ASTM standards – polyurethane foam

C1029-96 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
This specification covers the types and physical properties of spray applied rigid cellular polyurethane intended for use as thermal insulation. The operating temperatures of the surfaces to which the insulation is applied shall not be lower than -22°F (-30°C) or greater than +225°F (+107°C). For specific applications, the actual temperature limits shall be as agreed upon between the manufacturer and the purchaser.
C1289-01 Standard Specification for Faced Rigid Cement
This specification covers the general requirements for faced thermal insulation boards composed of rigid cellular polyisocyanurate surfaced with other materials. The insulation boards are intended for use at temperatures between -40° and 200°F (-40° and 93°C). This specification does not cover cryogenic applications. Consult the manufacturer for specific recommendations and properties in cryogenic conditions. For specific applications, the actual temperature limits shall be agreed upon by the manufacturer and the purchaser.
D5469-00 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems
This guide covers the application of new roofing systems consisting of spray applied polyurethane foam insulation, elastomeric protective coatings, and optional mineral granules. This guide does not apply to retrofit or remedial applications.
D6705-01 Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems
This specification guide covers the procedures for the repair and recoating of existing sprayed polyurethane roofing systems.
D6755-02 Standard Guide for Sampling and Inspecting Spray Polyurethane Foam and Coating in Roofing
This guide covers field and laboratory procedures for the sampling and evaluation of spray polyurethane foam roofing systems.